|
Tripods - How to Avoid Blurry Photos |
|
|
|
Written by Ziv Haparnas
|
|
Jan 31, 2008 at 06:09 PM |
|
All of us had the experience of shooting photos just to find out they
look blurry or too soft. In almost all cases the reason for that is
camera movement. When the camera moves while the shutter is open the
result is a soft or blurry photo. Usually camera movements are small
and for that reason in high shutter speeds the camera does not have an
opportunity to move enough. However in some scenarios such as slow
shutter speeds or high zoom values even the tiniest movement will
result in a blurry photo.
Most
photos are taken when the camera is held in your hand. The hand is an
unstable platform and tends to move quite a bit. Moreover new digital
cameras are smaller and lighter than ever before and are much harder to
keep stable. Another cause for camera movement is aggressively pushing
the shutter button which in return moves the camera. It is always
better to squeeze the shutter button very slowly to prevent the camera
from moving. Choosing the right camera for weight, grip and shutter
button sensitivity is a recommended way to minimize camera movements in
the future.
As a general rule photos that are taken with slow
shutter speeds or high zoom values should be taken using a more stable
platform than your hand. A stable platform can be anything that is
stable: a table, a shelf, a chair or a newsstand in the street. However
the platform that is considered the most stable and professional is the
tripod.
There are many types of tripods and they vary in size,
weight, price and other features. The most important criteria when
choosing a tripod is to pick one that will be easy to use. For example
if you are traveling consider a tripod that is easy to carry and
lightweight otherwise you will end up leaving the tripod in the hotel
room while missing great photo opportunities. On the other hand if you
take photos in a studio consider a heavier professional tripod.
Another
important feature to consider is the tripod’s height. Many tripods can
be locked at any height up to a maximum. Ideally you would want a
tripod that extends to your height allowing photos to be taken from the
same angle as your eyes as if they were taken by hand. Many portable
tripods extend to a waist height or less. In these situations the
tripod will be put on a raised platform or the photos can be taken from
a low angle.
In cases where a tripod is not available but a
stable platform is needed you can improvise by using many other
available platforms around you. For example you can place the camera on
a table when taking a photo or if you’re outdoors you can use a
newsstand, a tree to lean on, a fence or anything else that is stable
enough.
About Author:
Ziv Haparnas is an expert technology writer. Find more on photo printing and photography is on printrates.com - a place about Philips and digital photo printing Ziv Haparnas writes about science and technology.
Article Source: http://www.ArticleBiz.com
|